The Dual T1/E1 Framers form is used to program the two configurable hybrid ports on each Dual T1/E1 Framer. Each hybrid port can be programmed for an embedded PRI, DNPSS, or T1D4 trunk.
Use this form when performing the following tasks:
This form does not apply to the CX II and CXi II controllers.
Parameter |
Description |
Default Value |
Dual T1/E1 Framers |
||
Controller Module |
System-generated, protected field. Indicates the module's position in the controller. |
|
Unit |
Enter a unit number from interfaces 2 - 16. Two ports can be configured on each dual framer. |
Blank |
Comment |
Enter a name (up to 30 characters) to describe the framer port. |
Blank |
Dual T1/E1 Framer Port Configuration |
|
|
Port |
System-generated, protected field. Displays the port number for each module. |
|
Interface Type |
Select an interface type from the drop-down list:
|
Blank |